• Sifter can be opened, sieves completely removed and maintained, and then reassembled in minutes...with the turn of a key without special tools. Downtime is minimized.
• A pneumatic sieve clamping system allows fast disassembly. Sieves rest on lower drive frame carrier. The bottom sieve is held by stops. The remaining sieves and spacer each interlock and nest together. Using pneumatics the upper driveframe is raised to open the sifter or lowered to compress and seal the sieve stack. The pneumatics maintains constant compression while the machine is in operation.
• Our drive and frame carriers are engineered to minimize frame seal wear and eliminate leaks. The Tru-Balance drive transfers the gyratory motion to both the top and bottom drive carriers simultaneously. In turn the carriers equally impart the sifting motion to both the top and bottom of the sieve stack. The inertial “top heavy” lag common to sifters with drive mechanisms positioned below the sieve frame stack is avoided.
• Stainless steel sieve and product contact zone construction allows cleaning to be accomplished with dry brushing, air cleaning, water wash down or steam cleaning.
• Dust tight gasketed construction. No suction requirements.
• Sieves remove completely. Smooth base plate, easy access to outlet transitions.
• Upper and lower drive carriers remain attached to the drive mechanism.

To view or download brochures covering Great Western's Box Type Stianless Steel Tru-Balance Sifters CLICK HERE